Terra Algae Clean
A strong disinfectant cleaning solution that removes algae, mildew, fungus, and lichen stains from external surfaces such as brick, concrete, paving, tiles, tarmac, painted plaster, pebble-dash and render. It can be used neat of diluted.
Directions for use
Application:
Before application, heavily saturate the run off areas with water. Terra Algae Clean should be applied with a sprayer or a watering can then spread evenly with a soft broom or similar. Agitating some tougher areas can assist in the cleaning process. Leave for 30 minutes before washing off with copious amounts of water. Heavily diluted product will not harm plants but care should be taken to ensure wash-off area does not enter a pond or similar. Terra Algae Clean should be applied in dry weather when rain is not forecast.
Coverage
Coverage will vary considerably, depending on the infestation and/or dilution rates. Deep clean - used neat. 1 litre per 3m² of affected area should be adequate for all but the most extreme situations. Ongoing maintenance - Diluted at 1 part Terra Algae to 10 parts water.
Safety
Contains sodium Hypochlorite
Danger
If swallowed, drink plenty of water, seek medical advice immediately, DO NOT INDUCE VOMITING
Always rinse treated area thoroughly with plenty of water.
Product is safe to use in situations with septic tanks
Do not mix with other chemicals, such as acid, as this may release dangerous gases.
Health and safety, technical data sheets and application information available upon request